PCB Request

Email Dan Luig at dluig@coe.drexel.edu with Gerber files or if you have any questions.

Printed Circuit Board Information

Company: LPKF Laser & Electronics
Model: ProtoMat S62
Website: www.Ipkfusa.co

PCB Limitations
  • Largest Board Size – 8″ x 11″
  • Layers – Single or double sided *
  • Smallest trace width – 12 mil
  • Smallest insulation – 8 mil
  • Smallest drill diameter – .5 mm
  • Silkscreen – Not available
  • Solder Mask – Not available

*NOTE*: If possible, please use single sided. Through hole plating is available, but it will extend the turn around time. Minimum via size is .6mm.

Hole sizes for manual via punching:

If you Need: .6 mm .8 mm 1 mm 1.2 mm
Holes Must be: .9 mm 1.1 mm 1.5 mm 1.7 mm

Please keep in mind that your pads must be bigger than your holes